• For TV not equipped with HDMI input
• For users who don’t have HDMI cable

Connection Instruction

• Please connect DC Power in to AC power adaptor which is included in the package of HD-0310 and connect AC power adaptor to AC power supply.
• Please plug in the composite video cable to  the port  CVBS, Audio-R and Audio-L  of HD-0310 and follow the color of the cable as shown below.

• Find the port of the video, audio port of  TV which allows composite video cable connection

• Please plug in the cable matching the color for each port.

• Please select matching TV input source with your TV remote control. In our example, the composite cable has been connected to input 1.

• After TV input source selection, you will get following screen once you plug in memory cards or USB flash drive or portable drive

Now you can enjoy HD-0310.

• Choose the folder

• Photos can be previewed like this

• HD JPEG allows higher quality of photos decoding. But if we need to loop photos, we need to turn off HD JPEG.. Please press SETUP from the remote to enter SET UP mode and choose HD JPEG> Off

• Please also choose View> View Repeat
• If you wish to loop single photos continuously, please choose “Single”.
• If you wish to loop photos within one folder, please choose “Folder”
• If you wish to loop all photos within your storage media, please choose “All”
• If you don’t want to loop any photos, please choose “Off”

• Then, please press SETUP again to exist SETUP mode. This photo preview screen will appear again and Press OK to continue

The photos will start looping

**Note**

1. We default both HD-0310 and HD-0311 as HD Jpeg mode “on”. This will bring the best visual quality for each photos.
2. Whenever HD-0310 and HD-0311 got re-setted, switched on, existed Photo/ Slide Mode, HD Jepg mode “on” will be returned as default.
3. However HD Jepg does not support following features:

(I)                 Photo upscale (refer How to do photo upscaling)

(II)              Choose transition effect by pressing Transition button from the remote . (However, transition effect can be set in SETUP screen of the products.)

(III)            Photo preview in 9 pcs per screen by pressing  from the remote

(IV)           Zoom in  & out  the photos  from the remote

(V)              Photos Rotation         from the remote

Should you wish to set HD Jpeg mode “off”, you need to enter photo mode first. Press  >>  >> , then choose View >> HD Jpeg mode >> off and press  again and start to enjoy Photo and Slide

• Please press SETUP from the remote to enter SET UP mode and choose View >> Transition
• Please choose the transition effect required.
• Finally, please press SETUP again to exist SETUP mode

Method 2(For Non-HD JPEG decoding only)

• Whenever the device has been re-setted, switched on or exist Photo and Slide mode, HD-JPEG decoding mode will be returned to default setting. 
• When you plug in flash drive or memory cards, it shows below screen and select Photos or Slide

• Choose the folder

• Photos can be previewed like this

• If you have already choose the transition before, please press OK   to start to display photos. Default HD JPEG allows higher quality of photos decoding. But if transition effect want to re-select by the remote control, we need to turn off HD JPEG..
• In either entering Photo or Slide Mode, please press SETUP from the remote to enter SET UP mode and choose HD JPEG> Off, and then press SETUP again.

• This photo preview screen will appear again and Press OK   to continue

• When the photos are being displayed, please press Transition  once by once to select and stop at the transition mode required.